Samson 3274 - 13 Repairs; Returning the Actuator to SAMSON

EB 8340 EN 13-1
Repairs
13 Repairs
If the actuator does not function properly ac-
cordingtohowitwasoriginallycongured
or does not function at all, it is defective and
must be exchanged.
Risk of actuator damage due to incorrect
service or repair work.
Î Do not perform any repair work on your
own.
Î Contact SAMSON's After-sales Service.
13.1 Returning the actuator to
SAMSON
Defective actuators can be returned to
SAMSON for examination.
Proceed as follows to return devices:
1. Remove the electrohydraulic actuator
from the valve (see the 'Removal' sec-
tion).
2. Continue as described on our website at
uwww.samsongroup.com>Service&
Support>After-salesService>Returning
goods .
NOTICE
!
NOTICE
!