Samson 3274 - Page 7

EB 8340 EN 1-3
Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
wellasthespeciedhazardstatements,warningandcautionnotes.Furthermore,theoperat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards, directives and regulations
TheType3274ElectrohydraulicActuatorfulllstherequirementsoftheDirectives2014/30/
EUand2014/35/EU.Thedeclarationofconformityincludesinformationabouttheapplied
conformity assessment procedure. This declaration of conformity is included in the annex of
these instructions.
TheType3274ElectrohydraulicActuatorisdesignedforuseinlowvoltageinstallations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve (e.g. for SAMSON valves) on which the
electrohydraulic actuator is mounted
uEB5861forType3260Three-wayValve
uEB5868-1forType3214GlobeValvebalancedbyadiaphragm
uEB8012forType3241GlobeValve,ANSIandJISversion
uEB8015forType3241GlobeValve,DINversion
uEB8026forType3244Three-wayValve
uEB8051forType3251GlobeValve,DINversion
uEB8052forType3251GlobeValve,ANSIversion