EB 8097 EN 2-3
Markings on the device
Item Inscription meaning (see Fig.2-2 to
Fig.2-5)
28 Crush hazard warning
(pictogram)
(if applicable)
29 Arrow indicating the
direction of ow (graphic)
30 EHEDG compliance
(symbol)
(if applicable)
36 Marking for casting
2.2 Actuator nameplate
See associated actuator documentation.
2.3 Materialidentication
number
The valve plug has an item number written
on it. The material number of the valve body
is used to identify the seat. You can contact
us stating these numbers to nd out which
materials are used.
To Next Page
Loading...
