Samson 3347 - Removing the Valve from the Pipeline; Removing the Actuator from the Valve

11-2 EB 8097 EN
Removal
11.1 Removing the valve from
the pipeline
a) Version with welding ends
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport'
chapter).
2. Cut the pipeline in front of the weld
seam.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport'
chapter).
a) Valvewithanges,threaded
endsorclampconnections:
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport'
chapter).
2. Undo anged, threaded or clamp con-
nection.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport'
chapter).
11.2 Removing the actuator
from the valve
See associated actuator documentation.