Declaration of Conformity of Final Machinery
in accordance with Annex Il, section 1. A. of the Machinery (Safety) Regulations 2008
For the following products:
Pneumatic On / Off Valve Type 3351
We hereby declare that the machinery mentioned above complies with all applicable requirements stipulated
in Machinery (Safety) Regulations 2008.
For product descriptions of the valve and actuator, refer to:
▪ Type 3351 Valve: Mounting and Operating Instructions EB 8039
Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure regulators,
volume boosters and quick exhaust valves) are classified as machinery components in this declaration of
conformity and do not fall within the scope of the Machinery Directive as specified in § 35 and § 46 of the
Guide to Application of the Machinery (Safety) Regulations 2008. In the SAMSON Manual H 02 titled
"Appropriate Machinery Components for SAMSON Pneumatic Control Valves with a Declaration of Conformity
of Final Machinery", SAMSON defines the specifications and properties of appropriate machinery components
that can be mounted onto the above specified final machinery.
Referenced technical standards and/or specifications:
▪ VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) — Bedeutung für Armaturen, Mai 2018"
[German only]
▪ VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) — Bedeutung für
Armaturen vom Mai 2018" [German only], based on DIN EN ISO 12100:201 1-03
Comment:
Information on residual risks of the machinery can be found in the mounting and operating instructions of the
valve and actuator as well as in the referenced documents listed in the mounting and operating instructions.
Persons authorized to compile the technical file:
SAMSON REGULATION SAS – 1 rue Jean Corona – FR-69120 VAULX-EN-VELIN
Vaulx-en-Velin, 23
rd
December 2022
To Next Page
Loading...
