Samson 3372 - Page 11

EB 8313-3 EN 1-7
Safety instructions and measures
NOTICE
Risk of actuator damage due to excessively high or low tightening torques.
Observe the specied torques on tightening actuator components. Excessively tightened
torques lead to parts wearing out quicker. Parts that are not tightened far enough may
loosen.
Î Observe the specied tightening torques (uAB0100).
Risk of actuator damage due to the use of unsuitable tools.
Certain tools are required to work on the actuator.
Î Only use tools approved by SAMSON (uAB0100).
Risk of actuator damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the actuator material. Unsuitable lubricants may
corrode and damage the surface.
Î Only use lubricants approved by SAMSON (uAB0100).