EB 8313-3 EN 15-1
Annex
15 Annex
15.1 Tightening torques, lubri-
cants and tools
uAB0100 for tools, tightening torques and
lubricants
15.2 Spare parts
Type3372 Actuator with 120cm² actuator area
2 Bottom diaphragm case
2.2 Radial shaft seal
2.3 Wiper ring
2.4 Dry bearing
3 Actuator stem
4 Stopper
5 Label
6 Nameplate
7/8/9/10 Spring
11 Rod
12 Bushing
13 Diaphragm plate
14 Diaphragm plate
16 Top diaphragm case
17 Crossbeam
18 Diaphragm
21 Screw-on cap
22 Hex bolt
23 Hex bolt
24 Hex nut
25 Rod nut
26 Collar nut
27 Washer
28 Serrated lock washer
29/30 Stem connector clamps
35 Pneumatic connection
37 Rod
60 Upper actuator section
1)
62 Spindle
1)
63 Device cover
1)
64 Device cover
1)
65 Pin
1)
66 Sleeve
1)
68 Retaining washer
1)
70 Protective cap
72 Rod nut (hex nut)
73 Spindle
2)
74 Sleeve
2)
74.1 Dry bearing
2)
74.2 Radial shaft seal
2)
75 Cover
2)
76 Lock nut
2)
77 Top diaphragm case
2)
79 Lock nut
2)
1)
Only for version with handwheel
2)
Only for version with travel stop