Samson 3375-10 - 5 Installation; Installation Conditions

EB 8332-1 EN 5-1
Installation
5 Installation
5.1 Installation conditions
Work position
If not described otherwise in the valve documentation, the work position for the control valve
is the front view looking onto the operating controls.
Mounting orientation
Thecontrolvalvecanbeinstalledinthepipelineinanydesiredposition.However,asus-
pendedmountingpositionoftheactuatorisnotpermissible(seeFig.5-1).
0...90° 0...90°
Fig.5-1: Mounting position