EB 8332-1 EN 10-1
Decommissioning
Decommissioning
To decommission the electric actuator for
repair work or disassembly, proceed as
follows:
Î Put the control valve out of operation.
See associated valve documentation.
10 Decommissioning
Risk of fatal injury due to electric shock.
Î Before disconnecting live wires, switch
off the supply voltage at the actuator and
protect it against unintentional reconnec-
tion.
Risk of personal injury due to residual
process medium in the valve.
While working on the valve, residual me-
dium can ow out of the valve and, depend-
ing on its properties, cause personal injury,
e.g. (chemical) burns.
Î Wear protective clothing, safety gloves
and eye protection.
Risk of burn injuries due to hot or cold
components and pipeline.
Valve components and the pipeline may be-
come very hot or cold. Risk of burn injuries if
touched.
Î Allow components and pipeline to cool
down or warm up to ambient tempera-
ture.
Î Wear protective clothing and gloves.
DANGER
!
WARNING
!
WARNING
!
To Next Page
Loading...
