Samson 3375-10 - 12 Repairs; Returning the Actuator to SAMSON

EB 8332-1 EN 12-1
Repairs
12 Repairs
If the actuator does not function properly
according to how it was originally sized or
does not function at all, it is defective and
must be repaired or exchanged.
Risk of actuator damage due to incorrect
service or repair work.
Î Do not perform any repair work on your
own.
Î Contact SAMSON's After-sales Service
for repair work.
12.1 Returning the actuator to
SAMSON
Defective actuators can be returned to
SAMSON for repair.
Proceed as follows to return devices:
1. Remove the electric actuator from the
valve (see the 'Removal' section).
2. Continue as described on our website at
uwww.samsongroup.com>Service&
Support>After-salesService>Returning
goods.
NOTICE
!
NOTICE
!
Further information on returned devices and
how they are handled can be found at
uwww.samsongroup.com>Service&
Support>After-salesService.
Note