Samson 3730-2 - Accessories

EB 8384-2 EN 23
Design and principle of operation
3.5 Accessories
Table1: General accessories
Designation Order no.
Reversingamplierfordouble-actingactuators Type3710
Cable gland M20x1.5
Blackplastic(6to12mmclampingrange) 8808-1011
Blueplastic(6to12mmclampingrange) 8808-1012
Nickel-platedbrass(6to12mmclampingrange) 1890-4875
Nickel-platedbrass(10to14mmclampingrange) 1922-8395
Stainlesssteel1.4305(8to14.5mmclampingrange) 8808-0160
AdapterM20x1.5to½NPT
Powder-coated aluminum 0310-2149
Stainless steel 1400-7114
Lever
S 0510-0522
M 0510-0510
L 0510-0511
XL 0510-0512
XXL 0510-0525
Retrotkitforinductivelimitswitch1xSJ2-SN 1402-1770
IsolatedUSBinterfaceadapter(SAMSONSSPinterfacetoUSBportonacomputer)includingTROVIS-
VIEWCD-ROM
1400-9740
Serialinterfaceadapter(SAMSONSSPinterfacetoRS-232portonacomputer) 1400-7700
TROVIS-VIEW6661(downloadavailable:uwww.samson.de>SERVICE&SUPPORT>Downloads>TROVIS-VIEW)
Table2: Direct attachment to Type 3277-5 (see section5.3.1)
Designation Order no.
Mounting parts
Standardversionforactuators120cm²orsmaller 1400-7452
Versioncompatiblewithpaintforactuators120cm²orsmaller 1402-0940
Accessories for
actuator
Old switchover plate for Type 3277-5xxxxxx.00 Actuator (old) 1400-6819
New switchover plate for Type 3277-5xxxxxx.01 Actuator (new)
1)
1400-6822
New connecting plate for Type 3277-5xxxxxx.01 Actuator (new)
1)
,G
1
/
8
and
1
/
8
NPT 1400-6823
Old connecting plate for Type 3277-5xxxxxx.00Actuator(old):G
1
/
8
1400-6820
Old connecting plate for Type 3277-5xxxxxx.00 (old):
1
/
8
NPT 1400-6821
Accessories for
positioner
Connecting plate (6)
G
¼
1400-7461
¼
NPT 1400-7462
Pressure gauge bracket (7)
G
¼
1400-7458
¼
NPT 1400-7459
Pressure gauge mounting kit (8) up to max. 6 bar
(output/supply)
Stainlesssteel/brass 1402-0938
Stainlesssteel/stainlesssteel 1402-0939
1)
Only new switchover and connecting plates can be used with new actuators (Index 01). Old and new plates are not
interchangeable.