Samson 4763 - Personal Safety Risks

EB 8359-2 EN 1-3
Safety instructions and measures
− Type4763-0: 2014/30/EU, 2011/65/EU
− Type4763-1/-8: 2014/30/EU, 2014/34/EU, 2011/65/EU
Devices with an EAC marking fulll the requirements of the Regulation TRCU020/2011.
See the 'Certicates' section for the declarations of conformity and EAC certicates.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− The mounting and operating instructions of the components on which the positioner is
mounted (valve, actuator, valve accessories etc.).
1.1 Notes on possible severe personal injury
DANGER
!
Risk of fatal injury due to the ignition of an explosive atmosphere.
Incorrect installation, operation or maintenance of the positioner in potentially explosive
atmospheres may lead to ignition of the atmosphere and ultimately to death.
Î The following regulations apply to installation in hazardous areas: EN60079-14
(VDE0165, Part1).
Î Installation, operation or maintenance of the positioner must only be performed by
personnel who has undergone special training or instructions or who is authorized
to work on explosion-protected devices in hazardous areas.
Î Read the special instructions concerning explosion protection (see section1.4).
1.2 Notes on possible personal injury
WARNING
!
Risk of injury by possible movement of the actuator stem after connecting the signal
pressure.
Î Do not touch or block the actuator stem.