Selecting the Broadcast Audio Language (Analog)
●
Listening to Multi-Track Sound
Try Now
Select Audio Options > Multi-Track Sound. Configure the audio for the current broadcast. Multi-
Track Sound can be set to mono or stereo, depending on the broadcast signal or program.
However, this option is automatically set to mono if the broadcast signal or program does not
support stereo.
"
Press the INFO button to view the current broadcast's audio signal information.
"
While watching TV, press the TOOLS button, and then select Multi-Track Sound.
Fine-Tuning the Screen
MENU > Broadcasting > Channel Settings > Fine Tune
Try Now
"
Available for analog broadcasts only.
Analog pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
1.
Select Broadcasting > Channel Settings > Fine Tune. An adjustment bar appears on the screen.
2.
Press the
¡
or
£
button to make adjustments. Select Save or Close to apply the new setting.
Select Reset to reset the Fine-Tune operation.
Remove Scrambled Channels
MENU > Broadcasting > Channel Settings > Clear Scrambled Channel
Remove scrambled channels from your auto-programed channel list.
To Next Page
Loading...
Need help?
General
