Troubleshooting
Samsung Electronics 145
Complete
Yes
Yes
Apply the heat sink grease and then
reassembly.
No
Did properly apply the heat sink grease?
(Between the heat sink and the IGBT/PFCM)
Remove foreign objects and apply the heat sink
grease. And then reassembly
No
Did check the foreign objects between the heat
sink and IGBT/PFCM?
Good No Good
Grease Service Code : DB81-02483A
4-3-53 / Inverter PBA IPM overheating error
4-3 Appropriate Measures for Different Symptom (cont.)
Continue.
To Next Page
Loading...
