Disassembly and Reassembly
Samsung Electronics 51
3-2 Disassembly and Reassembly (cont.)
3-2-8 Removal Instructions for the Accumulator
No. Work Procedure Remark
8
To replace the accumulator or the parts behind the C/BOX, first
make sure that all parts in front of the parts to be replaced have
been removed to avoid interference.
The parts that need to be removed are C/BOX and parts that are
assembled replacement such as 4way, Bypass valve, suction
pipe, etc.
For C/BOX disassembly, separate the refrigerant cooling pipe
with torch or remove the screw on the Heat-sink on Inverter PCB.
Welding points for Cooling pipe disassembly
Screw points for Cooling pipe disassembly
Screw points for C/BOX disassembly
Ready to replace parts behind C/BOX
- Replacement instructions for the Accumulator, Parts behind the C/BOX
To Next Page
Loading...
