Samsung Electronics 34
Disassembly and Reassembly
3-2 Disassembly and Reassembly (cont.)
3-2-5 Removal Instructions for Fan and Motor
No. Work Procedure Remark
5
1) Disassembling a fan.
- A Guard Fan has been removed as shown.
Fan
- Use a 5mm hex wrench to unfasten the single screw on the Fan
Propeller.
- Lift and separate the Fan Propeller.
2) Removing a motor.
- A fan has been removed as shown.
- To remove a motor, first remove moter cables.
※ After inspection, be sure to place the connectors inside the
C-BOX to prevent rainwater damage.
To Next Page
Loading...
