Disassembly and Reassembly
Samsung Electronics 35
3-2 Disassembly and Reassembly (cont.)
3-2-5 Removal Instructions for Fan and Motor (cont.)
No. Work Procedure Remark
5
2) Removing a motor
- Remove the motor cable connectors.
※ If there is a difficulty removing a connector, pull the connector
while pressing down the hook with a tool.
- Remove the holders fixing the wires.
- Cut out the cable tie fixing the wires.
- Unfasten the four screws on the motor.
- Lift and separate the motor.
To Next Page
Loading...
