Samsung Electronics 46
Disassembly and Reassembly
3-2 Disassembly and Reassembly (cont.)
3-2-6 Removal Instructions for Compressor
No. Work Procedure Remark
6
Before replacing the compressor, check Accum oil return and Oil
return for blockage. Temperature detection can be performed
through gaps in the front. You can check if the pipe is blocked or
not by checking the temperature
2 comp model
1 comp model
1) Removing the compressors.
- Remove the cover of the power terminal block for the
compressor.
( 90cc compressor has additional soundproofing felt on terminal
block, so remove this first and then you can take out the cover.)
- Use a screwdriver to pull the upper part of the covertowards
you and remove the cover, as shown in the image.
46cc, 66cc compressor
To Next Page
Loading...
