Key Options
Samsung Electronics 301
■
MCM-C200 (Mode Selector)
• Operation mode lock (Cooling, Heating, Auto)
• Direct connection to outdoor unit
• Applied to DVM Plus II/III, mini DVM outdoor units
How to use
1. Connect the outdoor unit, according to the instructions in the installation manual.
3. All indoor units connected to the outdoor unit operate using the mode selected in step 2.
■
Mode Master ( Wired Remote controller & DMS 2 )
-
Setting : Connect just 1 indoor unit and stop the operation.
Then press and hold the Mode button for 5 seconds to set the indoor unit as 'Mode master indoor unit'
-
Cancelling : Connect just 1 indoor unit and stop the operation.
Then press and hold the Fan speed button for 5 seconds to cancel the 'Mode master indoor unit' setting.
■
Mode Select Switch Installation Instructions
Components
Wiring harness
Installation
tab (Figure 2).
-
tion to prevent damage to the tabs.
8-5-4 Application of Mode select Switch (cont.)
8-5 Applications (cont.)
To Next Page
Loading...
