Samsung Electronics 306
Test Operation
6) Trial Operation (Cooling/Heating)
This operation is designed to inspect items that are not inspected during Auto Trial Operation.
- Check to make sure that heating and cooling are properly performed.
- Check to make sure that each indoor unit is properly controlled by configuring settings, such as operation mode,
- Check the active outdoor and indoor units for the presence of noise.
- Check the outdoor and indoor units for drainage.
- To check more specific operation status, use the S-NET.
※
9-1 Auto Trial Operation (cont.)
9-1-1 Overview of Auto Trial Operation (cont.)
To Next Page
Loading...
