Disassembly and Reassembly
3-8 Samsung Electronics
No. Parts Procedure Remark
11 Control Box 1) Pull out all the connector on the pcb board
Quantity of the connector is different with dif-
ferent model
2) Remove the screw that x comp power
wire;(using "+" screw driver)
3) Remove the screw that x comp power
wire;(using "+" screw driver)
The follow step can be divided into 2 case
4) Case 1:Take o the control box directly without
welding
a) Remove 2 screws that x ing reactor wire;(using
"+" screw driver)
b) Pull out the connector as right pic
To Next Page
Loading...
