Disassembly and Reassembly
Samsung Electronics 3-9
No. Parts Procedure Remark
11 Control Box c)Pull out the connector of the wire that supply
single-phase power to inverter pcb;(Reer right
pic)
d)Pull out the connector of the wire that supply
three-phase power to power pcb;(Reer right
pic)
e)Remove 2 screws that xing IGBT with
heatsink,and 2 screws that xing pcb case
f)Band the handel of the case and take o the
assy inverter pcb;(Reer right pic)
Becareful when take off inverter pcb ;when
reassemble should ensure the silicon grease
thin and even
To Next Page
Loading...
