Samsung CLX-3160FN - Page 15

Product Specifications
Samsung Electronics
Service Manual
2-5
Copy Speed Simplex Copy Speed @SDMC up to 16 cpm in A4 black @SDMC up to 16 cpm in A4 black
(17 cpm in Letter)Up to 4 cpm in A4 color (17 cpm in Letter)Up to 4 cpm in A4 color
(4 cpm in Letter) (4 cpm in Letter)
Duplex Copy Speed N/A N/A
FCOT (B&W) From Ready Less than 18 sec Less than 18 sec
From Idle Less than 50 sec Less than 50 sec
From Coldboot Less than 50 sec Less than 50 sec
FCOT (Color) From Ready Less than 36 sec Less than 36 sec
From Idle Less than 75 sec Less than 75 sec
From Coldboot Less than 75 sec Less than 75 sec
Zoom Range 25% to 400% for Platen 25% to 400% for Platen
25% to 100% for ADF 25% to 100% for ADF
Multi Copy 1~99 1~99
Preset [Original(100%)] [Original(100%)]
[A4
A5(71%)] [A4 A5(71%)]
[LGL
LTR(78%)] [LGL LTR(78%)]
[LGL
A4(83%)] [LGL A4(83%)]
[A4
LTR(94%)] [A4 LTR(94%)]
[EXE
LTR(104%)] [EXE LTR(104%)]
[A5
A4(141%)] [A5 A4(141%)]
25%, 50%, 150%, 200%, 400% 25%, 50%, 150%, 200%, 400%
[Custom: 25-400%)] [Custom: 25-400%)]
Original Type Text Scan: 600x300dpi , Printing : 600x600dpi Scan: 600x300dpi , Printing : 600x600dpi
Text/Photo Scan: 600x300dpi , Printing : 600x600dpi Scan: 600x300dpi , Printing : 600x600dpi
Photo Platen) Scan : 600x600dpi, Platen) Scan : 600x600dpi,
Printing : 1200x1200dpi Printing : 1200x1200dpi
ADF) Scan : 600x300dpi, ADF) Scan : 600x300dpi,
Printing : 600x600dpi Printing : 600x600dpi
Automatic Background Suppression Yes(Mono Only) Yes(Mono Only)
Darkness Control 3 level 3 level
Collation Copy Yes(ADF Only), flushing if Memory full Yes(ADF Only), flushing if Memory full
Special Copy ID Card Copy Yes(Platen Only) Yes(Platen Only)
Auto fit Yes(Platen Only) Yes(Platen Only)
Margin Shift No No
Book Copy No No
Auto Suppression No No
Covers No No
Transparencies No No
Create Booklet No No
N-up copy 2-up, 4-up (ADF only) 2-up, 4-up (ADF only)
Clone Yes (Platen Only) Yes (Platen Only)
Poster Yes(Platen Only, x9 Only) Yes(Platen Only, x9 Only)
CLX-3160 Series CLX-3160N Spec. CLX-3160FN Spec.
2.2.4 Copy