Samsung Electronics
Service Manual
Disassembly and Reassembly
5-24
1. Before you remove the Main Drive Ass'y, you should
remove:
- LIU Unit (Refer to 5.15)
- Shield Main Lower(with Main PBA) (Refer to 5.16)
2. Release the Harness and Cable from the Cable
Clamp, as shown below.
3. Remove the nine screws securing the Main Drive
Ass'y and remove it, as shown below.
Notice: The eight screws have numbers stamped into
the Main Drive Ass'y base plate.
When refitting the Main Drive Ass'y tighten the
screws the order they are numbered.
5.17 Main Drive Ass'y
To Next Page
Loading...
