Samsung CLX-3160FN - T2 Roller Unit; Rear Cover

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-6
1. Push the Open Button and then open the Rear Cover,
as shown below.
2. To remove the T2 Roller Unit, first release the Holder
and rotate it from the Transfer Unit and then take out
the T2 Roller Unit, as shown below.
Notice : Do not grab the rubber part of the T2 Roller
Unit, it may cause a malfunction due to a
foreigen object.
Hold the both side of the T2 Roller Unit when
replacing it.
5.6 T2 Roller Unit
Open Button
Rear Cover
2
1
Holder
Transfer Unit
T2 Roller Unit
1. Remove the seven screws securing the Round Cover
and then release the Round Cover from the machine
completely, as shown below.
2. Open the Rear Cover(refer to 5.5.1) and then release
the Rear Cover in the direction of arrow, as shown
below.
5.7 Rear Cover
Round Cover
2
3
1
Rear Cover