Samsung CLX-3160FN - Shield Main Lower (with Main PBA)

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-23
1. Before you remove the Shield Main Lower(with Main
PBA), you should remove:
- LIU Unit (Refer to 5.15)
2. Unplug the all connectors from the Main PBA.
3. Remove the five screws securing the Shield Main
Lower(with Main PBA) and remove it.
4. If necnsary, remove the four screws securing the Main
PBA and remove it, as shown below.
5. The connectors are located, as shown below.
Shield Main Lower
(with Main PBA)

Main PBA
Shield Main Lower
Line
USB
Fuser
Clutch
BLDC
Scan
CCDM
USB Host
ITB Clutch
DEV_Sol
LIU
DEV_Home
Panel
SMPS
HVPS
Cover
LSU
SCF
DEV & ITB
Regi & Empty
Regi_Clutch
Pick Up
(Main PBA)
5.16 Shield Main Lower (with Main PBA)