101
SOFTWARE MANUAL
Using the USB Driver for MAC
1. Double click a new icon (Untitled) on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
5. A information window will open.
Click the [Continue] button.
6. Installation is complete.
Click the [Restart] button and your PC will restart.
7. Connect the camera to the Macintosh and turn the camera power on.
8. A new icon (Untitled) will be displayed on the desktop after connecting the camera to the MAC.
NOTICE
If you use Mac OS 10.0 or later, you may experience happening an error when you
transfer files from the PC to the camera.
SOFTWARE
To Next Page
Loading...
