41
RECORDING MODE
SELF-TIMER( ) / RIGHT( ) button
When the menu is displayed on the LCD monitor, the RIGHT
( ) button makes the sub menu data change.
When the menu is not displayed on the LCD monitor, the LEFT
( ) button operates as the SELF-TIMER button ( ).
This function is used when the photographer would also like to
be in the image.
Selecting the self-timer
The self-timer activates only in RECORDING (STILL IMAGE/
MOVIE CLIP) mode.
Use a tripod or place the camera on a stable surface.
1. Do not turn the LCD monitor off.
2. If the self-timer indicator is displayed on the LCD monitor by
pressing the SELF-TIMER button( ), the setting is
completed.
3. Pressing the shutter button will allow an interval of ten
seconds before the image is taken. After that, the self-timer
is cancelled. In the movie clip mode, the movie clip recording is started after 10 sec. To stop the
movie clip recording, press the shutter button(S1 : STOP)
Selecting the self-timer
INFORMATION
The default is OFF.
The self-timer LED lamp(red) will blink for 10 seconds after the SELF-TIMER button has
been pressed.
- For the first seven seconds, the LED blinks at one second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
If you want to cancel the self-timer operation, press the self-timer button again.
ADVANCED
To Next Page
Loading...
