Samsung Digimax 101 - PC Connection Mode; Connecting and Transferring Images via PC

79
Starting PC mode
PC MODE
If you insert the USB cable to USB connection terminal, the camera working mode will change to the
PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
There is no associated menu in PC mode and the LCD monitor is always turned off in PC mode.
The camera status LED(red) lamp blinks when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the camera power on.
2. Turn the PC power on.
3. Connect the PC and the camera by the USB cable.
- Insert the small plug of the USB cable to the camera
USB connection terminal.
- Insert the large plug of the USB cable to the USB port
of PC
- The plugs must be firmly inserted.
Disconnecting the camera and PC
Refer to the following page
- WIN 98SE : p.98
- WIN 2000/ME/XP : p.98
ADVANCED