63
PLAY MODE
COPY TO CARD
This enables you to copy image files to the CARD.
Copying image files to the CARD
1. Insert a card.
2. Turn the camera power on.
3. Press the MODE button to select the PLAY mode.
If you insert a card that hasn t an image, [NO IMAGE!]
message will display. But it isn t camera malfunction.
4. Press the MENU button to display the PLAY mode menu
on the LCD monitor.
5. To shift menu cursor to [PLAY 2/2], press the DOWN( )
button at the [DELETE ALL] menu that is in [PLAY 1/2].
6. Press the UP( )/ DOWN( ) button and select [COPY TO CARD].
7. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT( ) button.
8. Press the Ok button to confirm the setting.
[Selecting NO] : The display is returned to the initial menu.
[Selecting YES] : [PLEASE WAIT!] message will display. After copying the images to the card,
the last stored image of the last copied folder will be displayed on the LCD monitor
PLAY 2/2
COPY TO CARD
DPOF
LCD BRIGHTNESS
INFORMATION
If you select this menu and press the OK button without inserting the card, a [NO CARD!]
message will display.
If the card memory capacity is smaller than the internal memory, a [MEMORY FULL!]
message will be displayed by doing [COPY TO CARD].
Before doing [COPY TO CARD], delete unnecessary files.
YES NO
ADVANCED
To Next Page
Loading...
