Samsung Digimax 101 - Date Setup

73
SETTING UP THE CAMERA SYSTEM
DATE SETUP
Changing the date/time
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. To shift the menu cursor to [SETUP 2/3], press the DOWN( )
button at the [RESET] menu that is in [SETUP 1/3].
7. Select [DATE SETUP] by pressing the UP( )/ DOWN( )
button and press the OK button.
8. You can change the date/time on the LCD monitor display
by pressing the UP( )/ DOWN( )/ LEFT( )/ RIGHT( )
button.
UP( )/ DOWN( ) button : you can select
year/month/day, hour/minute
by pressing these button.
LEFT( ) button : decreases the number of items
RIGHT( ) button : increases the number of items
9. Press the Ok button to confirm the setting.
INFORMATION
The selection range for date/time setup covers from 2002~2099.
(It is automatically programmed to allow for a leap year/ month)
If you want to modify the minute after modifying the time, press the DOWN( ) button.
NOTICE
Even if the batteries or AC adapter are removed, it is necessary to check the date/time.
If the date/time is incorrect, reset the date/time.
SETUP 2/3
DATE SETUP
DATE IMPRINT
DATE TYPE
LANGUAGE
DATE/TIME
YEAR 2002
MONTY 09
DAY 01
TIME 00:00
ADVANCED