Samsung Digimax 101 - Format

70
SETTING UP THE CAMERA SYSTEM
FORMAT
This is used for formatting the internal memory / SD memory card.
Formatting the memory
Remove the SD memory card to format the internal
memory.
Insert the SD memory card to format the SD memory card.
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. Press the UP( ) /DOWN( ) button and select
[FORMAT].
7. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT( )
button and press the OK button.
[Selecting YES] : the [FORMAT] message will be
displayed on the LCD monitor. If you
select [YES] and press the OK button,
the memory will be formatted. If you
select [NO] and press the OK button,
the SETUP menu will be displayed
without formatting the memory.
[Selecting NO] : SETUP menu will be displayed.
The default is [NO].
NOTICE
All the files in the memory are deleted by [FORMAT] function.
Before formatting the memory, it is advisable to copy important data onto other media as
back-up e.g. floppy disks, hard disks, CD etc.
SETUP 1/3
BEEP
FORMAT
POWER OFF
RESET
FORMAT
NO YES