74
SETTING UP THE CAMERA SYSTEM
DATE IMPRINT
There is an option to include DATE/TIME on still images.
Selecting the date imprint function
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. To shift the menu cursor to [SETUP 2/3], press the
DOWN( ) button at the [RESET] menu that is in [SETUP
1/3].
7. Press the UP( ) /DOWN( ) button and select [DATE
IMPRINT].
8. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT( )
button and press the OK button.
[Selecting YES] : DATE/TIME is stamped on a stored image.
[Selecting NO] : SETUP menu will display without setting up this function.
INFORMATION
This function is not available in movie clip mode.
SETUP 2/3
DATE SETUP
DATE IMPRINT
DATE TYPE
LANGUAGE
YES NO
To Next Page
Loading...
