48
RECORDING MODE
QUICK VIEW
In STILL IMAGE mode, you can select the quick view menu.
You can briefly review the last image captured.
Selecting the quick view function
1. Turn the camera power on.
2. Press the MENU button to display the STILL IMAGE mode
menu on the LCD monitor.
3. To shift the menu cursor to [STILL IMAGE 2/2], press the
DOWN( ) button at the [EXPOSURE] menu that is in
[STILL IMAGE 1/2].
4. Press the UP( )/ DOWN( ) button and select [QUICK
VIEW].
5. Select [ON] or [OFF] by pressing the LEFT( )/ RIGHT( )
button. The default is [ON].
6. Press the Ok button to confirm the setting.
STILL IMAGE mode
INFORMATION
AUTO : The camera automatically selects the appropriate white balance settings,
depending on the prevailing lighting conditions.
DAYLIGHT : For taking images outside on a bright day
CLOUDY : For taking images under a cloudy and overcast sky.
SUNSET : For taking images at sunset
FLUORESCENT : For taking images under fluorescent lighting
TUNGSTEN : For taking images under tungsten (standard light bulb) lighting.
STILL IMAGE 2/2
STILL IMAGE 2/2
QUICK VIEW
LCD BRIGHTNESS
ON
OFF
To Next Page
Loading...
