75
SETTING UP THE CAMERA SYSTEM
DATE TYPE
You can select date type that is imprinted on the image.
Selecting the date type
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. To shift the menu cursor to [SETUP 2/3], press the
DOWN( ) button at the [RESET] menu that is in [SETUP
1/3].
7. Press the UP( ) /DOWN( ) button and select [DATE
TYPE].
8. Select the desired DATE TYPE by pressing the LEFT( )/
RIGHT( ) button. The default is [YYYY/MM/DD].
9. Press the OK button to confirm the setting.
SETUP 2/3
DATE SETUP
DATE IMPRINT
DATE TYPE
LANGUAGE
YYYY/MM/DD
ADVANCED
To Next Page
Loading...
