57
PLAY MODE
UP( ) button
When the menu is displayed on the LCD monitor, pressing the UP button ( ) makes the menu
cursor move up.
When the menu is not displayed on the LCD monitor, pressing the UP( ) button activates the
following.
- Normal display : Starts / stops the thumbnail display
- Thumbnail display : Selects a up image
- Digital zoom : Moves to the upper part of the image
Thumbnail display
1. Press the UP( ) button in the PLAY mode.
2. 9-images will be displayed at the same time on the LCD monitor. The thumbnail display will
highlight the image that had been showing at the time the thumbnail mode was selected.
3. Press the UP(
)/DOWN( )/LEFT( )/ RIGHT( ) button to move to the desired image. The
selected image is highlighted.
Icons are displayed to indicate the type of file selected.
( ) : Movie clip file ( ) : Protect indicator
( ) : DPOF indicator
4. When viewing a thumbnail image, press the OK button and the selected shot will show in single
display mode.
Pressing the OK button
Highlighted image
(selected image)
Thumbnail display mode Normal display mode
ADVANCED
To Next Page
Loading...
