420
Settings
• About information necessary for connection,
refer to user manual of wireless LAN access
point you use. When connecting to company
LAN or using Public wireless LAN service, ask a
network administrator or service provider about
the required information for connecting.
• When wireless LAN access point is set to
connect to a MAC address registered device
only,
register MAC address of this terminal to
the wireless LAN access point. From the Home
screen, tap
→ "Settings" → "Connections"
tab → "Wi-Fi" → → "Advanced" to check
MAC address. You can view IP address of the
connected Wireless LAN access point.
1
2
3
• The possible certicate method is "WEP",
"WPA/WPA2/FT PSK", "802.1x EAP".
4
• If you set security to "None", entering
password is not needed.