421
Settings
Set whether to automatically connect to
Passpoint compatible Wi-Fi access point within
the Passpoint compatible Wi-Fi access point
area without setting Wi-Fi access point.
1
2
3
• To scan Passpoint compatible access
point, tap "Passpoint".
You can set to disable Wi-Fi when the display of
this terminal turns o or to enable when charging.
1
2
3
• If sleep mode is set to "Only when plugged
in" or "Never (increases data usage)", network
connection automatically changes to the
mobile network when Wi-Fi communication
becomes unavailable. In such case, packet
communication fee may become high. If you
do not want to change to mobile network,
mark "Always".
To Next Page
Loading...
