ㅁ Manual adjustment : Create a cal txt file by entering a manual layout and photographing the screen
without connecting to the box.
1) Upload the layout information of the screen to be photographed to the mobile phone according to
the following rules under the file name 'layoutInfo.txt'
Mobile phone storage location : Save under ‘DCIM\MCE2\‘
: cabinet group / cabinet / module Configuration information and id information
Screen Layout Example
Gradation Calibration – SMC Manual control
<cabigroup>
1x1
1
<cabinet>
4x2
9,8,5,4,7,6,3,2
<module>
2x3
‘layoutInfo.txt’
Content
BOX
configuration information
Cabinet
configuration information
Module
configuration information
Cabinet input sequence
To Next Page
Loading...
