LED R&D Lab(VD)
15
▶ Connection structure: Connection of signal cable (OCM) and power cable between
P-FRAME and P-FRONT
1) P-FRAME Left/Right Connection
- Cable Connection between AC Inlet Boards for Power On
- Speaker Left/Right Cable Connection
2) Cable connection between P-FRAME + P-FRONT
- Connect 4 OCM cables to the video output port of the main board
→ After assembling the OCM cable according to each P-FRONT location, connect it
to the Lower Board OCM connector at the bottom of the P-FRONT
- Connect SMPS output cable and screen power input cable in P-FRONT
□ Features when configuring the screen
(differential specifications compared to the existing ones)
1. Product and installation information
To Next Page
Loading...
