LED R&D Lab(VD)
13
1. Product Information and Installation Precautions
◆ Installation precautions (LED damage)
Precautions Images
[Be careful of external impact or dropping]
① After removing the Cover-Corner from the product prior to installation,
exercise caution to ensure that the LED surface is not exposed to physical
impact and the product is not dropped onto the floor.
② Do not place the product on a vibrating object. Make sure the LED surface
does not face down onto the floor.
③ Exercise caution to ensure that the corners of the LED module are not
damaged due to contact with external factors.
④ Make sure the number of loaded rows does not exceed 12.
① ②
③ ④
[Be careful of LED damage due to static electricity]
▶ Do not touch the LED surface with bare hands without anti-static gloves.
[Be careful of LED damage due to metallic foreign material]
▶ Exercise caution to ensure that metallic foreign material is not attached to
the LED front.
▶ If metallic foreign material is attached, remove the module and use a
magnet to remove the foreign material.
MODULE
Front
Metallic
foreign
material
To Next Page
Loading...
