LED R&D Lab(VD)
59
6. S-Box Installation and Connection
• Product recommend installing this product in a standard 19-inch server rack, please refer 35 page about basic
installation guide.
• How to install when use Multi Link HDR function
① Please open rubber plug of Multi Link HDR port.
② Connect the connector of the cable of Multi Link HDR to the
Multi Link HDR port of each S-BOX.
(※ Note : Connect the connector’s structure to face up)
③ Menu – Picture – LED HDR – Multi Link HDR Settings – ON
④ Set the quantity of S-BOX connected each other. (2/3/4)
⑤ Set S-BOX ID
(※ ID must not be duplicated between linked S-BOX )
Multi Link HDR Port
Multi Link HDR Port
UP
SIDE
(No support for SBB-SNOWJAU or below models)
To Next Page
Loading...
