To Next PageTo Next PageWhy can't I select L/L mode on my Samsung IPOLIS SNP-3300 Security Camera?
If the L/L mode cannot be selected on your Samsung Security Camera, check the frequency of the power supply. It should be 60Hz for NTSC or 50Hz for PAL.
Why is DAYNIGHT(Auto) mode not working on my Samsung IPOLIS SNP-3300 Security Camera?
If the DAYNIGHT(Auto) mode is not working on your Samsung Security Camera, check if the AGC menu is set to the OFF position.
General| Brand | Samsung |
|---|---|
| Model | IPOLIS SNP-3300 |
| Category | Security Camera |
| Language | English |
Overview of the SNP-3300 network camera, its technology, and network capabilities.
Highlights main features: zoom, auto-surveillance, protocols, and Day & Night function.
Identifies physical components of the camera body, focusing on the power switch.
Details connection ports on the camera holder: Ethernet, AC power, audio, and alarm.
Illustrates connection scheme for BNC, AC power, audio, alarm, and Ethernet interfaces.
Instructions for connecting the camera to a monitor for initial setup and imaging range verification.
Guidance on connecting the camera to power, including adapter specs and wire resistance.
Outlines installation precautions, mounting options, and use of brackets and housings.
Details configuring network settings and connecting to the camera via a web browser.
Explains logging into the camera's web interface, including credentials and access modes.
Details the layout and functionality of the Web Viewer screen, including controls and video display.
Covers the initial screen after connecting and accessing the live video feed.
Details video/audio setup, compression, resolution, frame rate, and product information.
Explains network settings like IP, DHCP, ports, and DDNS.
Describes user account setup, password changes, and authority management.
Covers configuration of PTZ functions, presets, swings, groups, tours, and auto-run.
Details setting up motion detection, including grid, area selection, and sensitivity.
Explains alarm inputs, outputs, and email/FTP notification setup.
Guides on setting time, date, and managing system event logs.
Details firmware upgrade and system reboot procedures.
Explains the On-Screen Display (OSD) menu structure for camera settings.
Details settings for White Balance, Exposure, Back Light, AGC, SSNR, and Day & Night.
Covers setting up Presets, Swings, Groups, Tours, Traces, and Auto Run.
Details settings for Pan/Tilt limits, area designation, masking, and digital flip.
Covers configuration of OSD elements like Camera Name, Preset Number, Sequence Status, and Language.
Explains methods for resetting the camera to default settings.
Displays current camera status, model, version, and controller information.
