44 45
Controlling External Devices with the TV Remote
(Universal remote setup)
System Universal remote setup
"
Availability depends on the specific model and area.
The universal remote control feature lets you control cable boxes, Blu-ray players, home theatres, and
other external devices connected to the TV using the TV's remote control.
"
You can also use the Anynet+ (HDMI-CEC) function to operate some external Samsung devices with your
TV's remote control without any additional setup. Refer to the "Using Anynet+ (HDMI-CEC)" section for
more information.
"
Certain external devices connected to the TV may not support the universal remote feature.
Setting Up the Universal Remote Control
1.
Turn on the external device you want to control with the universal remote function.
2.
Press the SOURCE button on your remote to bring up the Source screen.
3.
Select the Universal remote setup.
"
You can also start Universal remote setup through the TV's menu. Select System Universal remote
setup.
4.
Follow the directions on the screen to complete the set up and register the device. The directions
will be different, depending on the device you want to control.
"
If the external device does not respond after being registered, register it again using its model number.
"
The TV memorises both the external device and the connection (HDMI 1, HDMI 2, etc.) the device is
connected to.
To Next Page
Loading...
Need help?
General