46
Universal Remote Features
1.
Press SOURCE to go to the Source screeen.
2.
Select Universal remote setup from the top of the screen. This initiates the universal remote
setup process.
3.
Select an external registered device on the Universal remote setup screen. The following options
are available:
●
Use External Speakers
Listen to the audio from the external device through the connected home theater.
"
This is available only on the set-top box or Blu-ray player.
●
Link Set-top Box
Listen to the audio from the set-top box through the home theater that is connected to the TV.
"
This is available only on the home theater system.
●
Link Blu-ray Player
Listen to the audio from the Blu-ray player through the home theater that is connected to the TV.
"
This is available only on the home theater system.
●
Source Setup
Change the TV's input source to your selected external device.
●
Sync with TV power
Configure the set-top box to turn off when the TV is turned off.
"
This is available only on the set-top box.
●
Rename
Rename the registered external device (up to 15 characters long).
●
Delete
Remove the registered external device.
To Next Page
Loading...
Need help?
General