No Image Procedure
1 Push the2 fixing structures at the bottom inwards, and then
pull up the front cover to separate it from the rear cover.
(This step is easy when using a flathead screwdriver.)
When assembling, assemble the upper part first as in the
picture, and then insert the bottom hook.
2 Separate the door cover by pushing the bottom-right part of
the product sideways.
For assembling or dismantling, leave the door cover
open about 130 degrees as in the image to do the work.
Otherwise, the hinge may be incorrectly assembled,
resulting in faulty operation.
3. Disassembly and Reassembly
유선리모컨_MWR-WE10_E_33320A(1)_1.indd 1 2010-12-23 오후 5:51:18
To Next Page
Loading...
