Samsung N64D - Servicing Information; USB Download Method

4-44
4. Troubleshooting
Adjustment Coordinate
x y Y(L) T(K) + MPCD
CVBS
(NTSC)
H/L 272 287
-
(Sub_CT:132)
11,000 (+10)
L/L 272 287
12.0cd/m
2
(3.5 Ft)
11,000 (+10)
COMP
(720P)
H/L 272 287
-
(Sub_CT:132)
11,000 (+10)
L/L 272 287
12.0cd/m
2
(3.5 Ft)
11,000 (+10)
HDMI
(720P)
H/L 272 287
-
(Sub_CT:132)
11,000 (+10)
L/L 272 287
12.0cd/m
2
(3.5 Ft)
11,000 (+10)
- Adjustment Specication
White Balance : High light (±2), Low light (±3)
Luminance : High light (Don’t care), Low light (±0.2 Ft/L)
4-8. Servicing Information
4-8-1 USB Download Method
Samsung may offer upgrades for TV’s rmware in the future. Please contact the Samsung call center at 1-800-
SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be
possible by connecting a USB drive to the USB port located on your TV.
Insert a USB drive containing the rmware upgrade into
the USB port on the rear of the TV.
Enter the Interactive menu by pressing this buttons in order
INFO → MENU → 0 → 1 → EXIT
Turn off the Hotel Mode.
Power Off and Turn On.
Press the MENU button to display the menu.
Press the or button to select “Support”, then press the
ENTER button.
Press the or button to select “SW Upgrade”, then press
the ENTER button.
The message “Scanning for USB. It may take up to 30
seconds.” is displayed.
The message “Upgrade version XXXX to version XXXX?
The system will be reset after upgrade.” is displayed.
Press the or to select the “OK”, then press the ENTER
button.
Please be careful to not disconnect the power or remove the
USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the rmware upgrade.
Please check the rmware version after the upgrades are
complete. When software is upgraded, video and audio settings
you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can
easily reset them after the upgrade.
1.
2.
3.
4.
5.
6.
7.