●
HDMI Black Level
Certain external devices connected to the TV via an HDMI cable can produce issues such as black
level, low contrast, and dull colours. In this case, users can adjust the black level to compensate.
This feature is only available in HDMI mode.
Try Now
●
Film Mode
Optimizes the picture quality for movies. Select the mode for watching movies. This feature is
only available when watching TV or when the input signal is AV, Component (480i, 1080i), or
HDMI (1080i).
Try Now
●
Motion Plus
(Depending on the Models)
Removes blurring and judders from scenes with rapid movement. If you select Custom, you can
configure the after image and screen trembling removal ratio and you can view a sharper image
through the LED Clear Motion function.
"
The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but
not the frequency the TV is generating for the image it is displaying by using Motion Plus function.
"
If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can
set up the Blur Reduction, Judder Reduction, LED Clear Motion and Reset manually.
–
Blur Reduction: Adjusts the blur reduction level from video sources.
–
Judder Reduction: Adjusts the judder reduction level from video sources when playing films.
–
LED Clear Motion : Removes drag from fast scenes with a lot of movement to provide a clear
picture.
–
Reset: Reset the custom settings to the factory defaults.
"
While Motion Plus is running, select the Virtual Remote panel's or the regular remote's INFO button to
display the resolution and frequency of the incoming video signal (60Hz). The displayed frequency is
not the same as the frequency of the picture the TV is displaying when Motion Plus is activated.
●
Analog Clean View
This function reduces diagonal noise in the picture caused by signal crosstalk (interference). If
your TV picture displays diagonal noise or distortion when you watch, turn on this function.
●
Black Optimization
(Depending on the Models)
Adjusts the black colour depth. In Movie mode, this feature dims the top and bottom areas of the
video image to provide a more immersive viewing experience.
This feature is only available for PDP TVs.
●
LED Clear Motion
This function is only available on the LED4500 - 5500 series.
Removes drag from fast scenes with a lot of movement to provide a clear picture.
To Next Page
Loading...
Need help?
General