Device Management
Designate a device connected to the TV as a dedicated recording device. Refer to the Dedicated
Recording Device Management section for more information.
Playing a Different Programme
●
Select the
€
/
‚
on-screen button.
●
Select the Search on-screen button and then Search Titles.
Programme Scan
●
Press left/right button on the remote control. Scan 10 seconds backward or forward.
For LED 6400 - 6800, PDP 5500 Series
Drag left/right on the touchpad. Scan 10 seconds backward or forward.
●
Press
†
/
…
. You can change the playback speed by a factor of up to 7. To restore normal
playback speed, press
∂
. Alternatively, press
…
while paused to reduce the playback speed (1/4).
Slow playback doesn't support audio and is available in the forward direction only.
●
Press
∑
to pause the screen and then
∑
to scan through the paused video in 1-frame increments.
Audio is not supported while the video is paused.
●
Select Search from the on-screen control buttons and then select Search Scene. You can play
the file from a particular scene. However, this function is not available with the following.
–
Scene thumbnails are not created.
–
Only sound is recorded.
–
The recording time is under 60 seconds.
–
The Programme Rating Lock is enabled.
●
Select the Search on-screen button and then Search Time Bar. This lets you skip to the specified
time frame.
●
Select the
€
on-screen button. This plays the video from the beginning.
To Next Page
Loading...
