●
Digital Channel Tuning
Scans for a digital channel.
1.
Select the New.
2.
Set the Channel, Frequency, Bandwidth.
"
The Bandwidth function may not be supported depending on the region.
3.
Select the Search. When scanning has finished, a channel is updated in the channel list.
●
Analogue Channel Tuning
Scans for a analogue channel.
1.
Select the New.
2.
Set the Programme, Colour System, Sound System, Channel and Search.
3.
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
To Next Page
Loading...
